Professional Drywall Set up & Repair: Contact Us at (408) 805-3372. Take away the drywall over the stud utilizing a utility knife. Place it atop the joint and use your taping knife to easy the brand new tape into the compound. Two coats of drywall compound, utilized with two swipes of the knife in a +” sample, ought to fill the holes (Photo three). The primary coat will shrink a bit, leaving a slightly smaller dent to be filled by the second coat.
And use a roller when priming to help elevate the floor texture to match the surrounding wall. Simply adhere the patch to the wall and cover with drywall compound. Let the patch dry and apply a second coat of compound if wanted. Apply a number of coats of joint compound to the repair, permitting ample drying time between every coat.
Use a screw gun to lock a 2-by-4 nailer to the open face of each stud after which minimize a new piece of drywall to suit the opening. In this step we’re utilizing a lightweight spackling that goes on pink and turns white when it’s dry, which lets you know it is prepared for sanding.
Spread drywall compound over the patch, feathering out the perimeters. A standard drywall problem, particularly in newer houses, is nail pops,” or nail heads that pull away from the wooden studs and protrude by the drywall tape or paint. Permit the joint compound to dry fully then evenly sand the realm (image 3). Wipe away the dust then paint over it.
Place drywall piece over the broken area (image 1) and hint round it with a pencil (image 2). Use a drywall or reciprocating saw to chop out the world inside the traced lines (picture three). Cut two items of 2×4 barely larger than the outlet.